Plywood Headboard Tufted Diy. Have you ever wondered how to make those deep, diamond tufted headboards? Select and cut the wood.
DIY plywood headboard Plywood headboard, Plywood headboard diy from www.pinterest.fr
3/4″ roofing nails * washers that are 3/4″ diameter * hammer * fabric button kit, 3/4″ size * Before you dive in, decide the feeling you want your headboard to bring to the space. First off, cut the foam into a size that would fit the plywood, then place another piece of foam on top, and cut it out as well.
1″ X 2″ X 8′ Furring Strips Or Metal Mending.
Screw the plywood to the stretcher every few inches all the way around. Tape measure * permanent marker. Have you ever wondered how to make those deep, diamond tufted headboards?
Decide On Your Headboard Shape.
Figure out and decide how many tufts you would want to have, then plan the arrangement of the nails and their pattern so that you know how much you’ll need. I knew the shape i wanted the headboard to be for awhile, but i just found out the other day that it had a name: Web i will show you how to make an easy diy tufted headboard.
Web You Can Make One Yourself.
Level * or yard stick. I wanted the belgrave look, which was totally easy to diy. Most hardware stores will cut the board to the correct size for free or a small fee.
Staple Gun * With Staples.
Cut plywood to desired headboard size. 4′ x 8′ sheet of plywood (i used 11/32″ yellow pine) 2″ upholstery foam roll; This will determine which fabric you choose.
Select And Cut The Wood.
Before you dive in, decide the feeling you want your headboard to bring to the space. First off, cut the foam into a size that would fit the plywood, then place another piece of foam on top, and cut it out as well. If you decide to cut it at home, a circular saw will help you make straight and clean.
