Cement Plant Stand Diy. Since i had had issues with cracks in the concrete due to the wood soaking up water i decided to put clear packing tape around one end of each rod to protect it from the water. Information on materials and supplies can be found at:
I started the project out by preparing the 3 sections of wooden rod. You don’t need a miter saw to cut the dowel, but it sure makes the job easier! Concrete, wooden dowels, water and a bucket are all you need.for mo.
Web So I Decided To Create My Own Diy Concrete Plant Stand, And I Love How It Turned Out.
Learn how to create your own cement plant stand. 1 bucket (i wanted a smaller plant stand, so we used a 2 gallon bucket) saw. 1 bag concrete mix (i got ours at home depot for just over $2) 1 dowel (ours was 7/8″, also at home depot for just over $3) measuring tape & pencil.
Concrete, Wooden Dowels, Water And A Bucket Are All You Need.for Mo.
I started the project out by preparing the 3 sections of wooden rod. Web a plant stand can be used to display indoor plants or as an accent piece in an outdoor space. They can blend with their surroundings or stand out as a unique piece of furniture themselves.
You Don’t Need A Miter Saw To Cut The Dowel, But It Sure Makes The Job Easier!
Information on materials and supplies can be found at: Follow along for all the details… the supply list is very small and inexpensive for this project. Web here’s what you’ll need:
Web Simple And Modern, This Diy Concrete Plant Stand Is The Perfect Showcase For Your Plants.
586 views 2 years ago. Mix the concrete with a drill and a mixing accessory or by hand until the consistency is like good pudding. Since i had had issues with cracks in the concrete due to the wood soaking up water i decided to put clear packing tape around one end of each rod to protect it from the water.
Pour A Little Bit Of Water Into Your Mixing Bucket First, And Then Add Your Concrete Mix.
The next step in this diy project is to mix up the cement.