Diy Succulent Plant Wood Stand. We laid the pots upside down to determine their positions and ultimately how long we wanted each board. Web simple wood succulent plant stand plus extra feature!
Pin by Rachel Kirkham on Hadianna Cabins in 2021 Plant wall from www.pinterest.com
It’s #diyfriday with another tumbling tower block craft! How to make an indoor/outdoor wood diy plant stand step by step instructions. Make pocket holes in the ends of the shelf supports;
The Specific Requirements May Vary Depending On The Design You Choose, But Here Are Some Basic Supplies You Will Likely Need:
Lumber (2×2 or 1×2) plywood or wooden boards. Web simple wood succulent plant stand plus extra feature! Before you begin, make sure you have all the necessary materials and tools.
It’s #Diyfriday With Another Tumbling Tower Block Craft!
We laid the pots upside down to determine their positions and ultimately how long we wanted each board. How to make an indoor/outdoor wood diy plant stand step by step instructions. Web how to make a wood diy plant stand materials list;
Cut The Plant Shelf Supports (Cross Bars) And Create Pocket Holes;
Gather the materials and tools. Cedar works great, but you can use anything as long as it’s about 4 inches wide and 4 inches deep. During the porch refresh, we decided we needed some kind of decor for the large siding clad wall.
3K Views 2 Years Ago Chicago.
The diy scrap wood succulent planter is a great option if you have spare wood. Cut the legs to fit. Below is our cut list.
Cut Boards And Drill Holes.
We are making a succulent plant stand that can easily be lengthened to add multiple small plants. Make pocket holes in the ends of the shelf supports; The dimensions of the planter are:
